2017 EX Stock Muffler Internals Exposed

[ssudden_imp]

Check out this video:
https://www.youtube.com/watch?feature=pl...CMNT1VlszM
At around 11:40 it shows a cut away view of the 2017 muffler compared to the earlier model. If you pause the video, you can clearly see how easy it would be to get a little more throaty sound. Its a straight shot from the rear of the muffler to the baffle about 6 to 10 inches inside. Just put a long drill bit straight in and drill bigger holes. You could slowly increase the size of the holes until you get the sound you want. You can also see that the older model would be impossible to modify that simply if at all.
Wish I knew what that guy in the video is saying! I'm guessing the top one is the 2017 because its shorter.

KC

I wish they had English version

Sent from my XT1254 using Tapatalk

Check out this video:
https://www.youtube.com/watch?feature=pl...CMNT1VlszM
At around 11:40 it shows a cut away view of the 2017 muffler compared to the earlier model. If you pause the video, you can clearly see how easy it would be to get a little more throaty sound. Its a straight shot from the rear of the muffler to the baffle about 6 to 10 inches inside. Just put a long drill bit straight in and drill bigger holes. You could slowly increase the size of the holes until you get the sound you want. You can also see that the older model would be impossible to modify that simply if at all.
Wish I knew what that guy in the video is saying! I'm guessing the top one is the 2017 because its shorter.

KC

I like the fact you can sit and revving engine and get Applause and a bouw

Sent from my XT1254 using Tapatalk