05-08-2018, 01:31 PM
(05-08-2018, 01:06 PM)tommymck_imp Wrote: That's what mine looks like also. Thanks for the pic! The issue on mine is that the nut on the stalk is backed off all the way to the top of the thread and won't turn. It's probably tight enough that it just didn't want to loosen up. I'll try a piece of cloth on the stalk with plyers as I try to back off the nut.....
Just make sure you are turning it the correct direction. I think that is a left hand thread, try turning it the opposite direction of the way you did when you couldn't loosen it. Pliers are a good way to scratch things up, even when using cloth.
