Touring screen for road comet

[vfrpaul98_imp]

I'm running the touring screen, seems to work better than the standard low screen but you will have more shaking of the entire fairing. I solved that by adding some small hard neoprene pads to the top edges of the instruments to fill the gap with the edge of the fairing body. Another member on the forum suggested that solution and it's simple and works.

I seemed to have picked up a buzz in the fairing somehow with the change but that really doesn't make sense since I can notice it at idle as well as at speed, maybe the change in the weight of the screens makes the fairing buzz.

Overall it looks pretty good and works well enough without buffeting but like usual your situation may differ.

Aloha,
Huladog

I took my comet fairing off to remove the headlite and install a Osram 65/70 bulb. after reassembly during my ride a very loud buzz was coming from the headlite/fairing area. inspection revealed harness connectors inside the headlite rattleing against the shell. I removed the shell and lined it with plumbing insulation tape 1/8"thick 2"wide sticky on just one side. no more buzz from the shell or fairing.
Paul