(07-20-2013, 12:04 PM)MotoMichael_imp Wrote: (07-20-2013, 05:56 AM)EmptySea_imp Wrote: OK, so I got the plate cut and am all set to drill the two holes to mount the plate to the fender, but then I realized that I have know idea how to remove the old bracket. I assumed it was mounted with Phillips-head bolts, but it's not. I read the whole thread and couldnt find instructions for this part. Probably super simple, but if someone could give a guy a little guidance that would be great. Thanks.
There are two 10mm nuts under the fender to remove the existing bracket !
There are two 10mm nuts under the fender to remove the existing bracket !
Well, that makes sense. I was operatining under the assumption that the holes in the fender were threaded. Never even thought to look for bolts on the under side. Thanks!