Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Chip Beck Spec Low Handlebar/Mirrors Mod.
Author Message
coryredick_imp Offline
New to the Forum


Posts: 4
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2015
RE: Chip Beck Spec Low Handlebar/Mirrors Mod.
#84



(04-03-2015, 02:55 AM)bustin dailey_imp Wrote:
(04-03-2015, 12:20 AM)coryredick_imp Wrote:
(04-01-2015, 12:54 PM)bustin dailey_imp Wrote:
(03-24-2015, 10:51 PM)coryredick_imp Wrote: Ordered these bars and had them put on at the Honda dealership for my 600 mile service. I am 6' 2" and have long arms. I love the new sportier riding position and I don't feel like I lost any control or leverage whatsoever and they look fantastic. Also, we decided that drilling holes wasn't necessary as it didn't effect the position of the levers enough to warrant. Thanks Chip for doing the leg work on this!

I installed mine this weekend. I don't know what we did different, but without drilling new holes the controls were rotated way too far down, leaving the throttle cable coming out of the control pointing up. I thought it looked funny.

Care to share a photo of yours for reference for everyone?


Installed my bars and mirrors this past weekend, as well as some fork gaitors.

I am 6'4" with very long arms, so for me this completely transformed the bike. I am far more comfortable on long trips, and in town the bike handles much better.

I installed mine this weekend. I don't know what we did different, but without drilling new holes the controls were rotated way too far down, leaving the throttle cable coming out of the control pointing up. I thought it looked funny.

Care to share a photo of yours for reference for everyone?


Installed my bars and mirrors this past weekend, as well as some fork gaitors.

I am 6'4" with very long arms, so for me this completely transformed the bike. I am far more comfortable on long trips, and in town the bike handles much better.
Sure. My controls are in a very comfortable position and the cables re-routed nicely I think, but matter of opinion I guess.

I installed mine this weekend. I don't know what we did different, but without drilling new holes the controls were rotated way too far down, leaving the throttle cable coming out of the control pointing up. I thought it looked funny.

Care to share a photo of yours for reference for everyone?


Installed my bars and mirrors this past weekend, as well as some fork gaitors.

I am 6'4" with very long arms, so for me this completely transformed the bike. I am far more comfortable on long trips, and in town the bike handles much better.
Sure. My controls are in a very comfortable position and the cables re-routed nicely I think, but matter of opinion I guess.
Ah, must be a difference in the control pin location on the 2014 models, either that or they ground the pin off on the controls, which would get them around drilling new holes in the bars also. The only reason we drilled new holes was so I could be certain the throttle wouldn't eventually rotate on the bar. But again, mine being a 2013 I bet the controls themselves are different too.

Either way, your bike looks great! Thanks for sharing!

I installed mine this weekend. I don't know what we did different, but without drilling new holes the controls were rotated way too far down, leaving the throttle cable coming out of the control pointing up. I thought it looked funny.

Care to share a photo of yours for reference for everyone?


Installed my bars and mirrors this past weekend, as well as some fork gaitors.

I am 6'4" with very long arms, so for me this completely transformed the bike. I am far more comfortable on long trips, and in town the bike handles much better.
Sure. My controls are in a very comfortable position and the cables re-routed nicely I think, but matter of opinion I guess.
Ah, must be a difference in the control pin location on the 2014 models, either that or they ground the pin off on the controls, which would get them around drilling new holes in the bars also. The only reason we drilled new holes was so I could be certain the throttle wouldn't eventually rotate on the bar. But again, mine being a 2013 I bet the controls themselves are different too.

Either way, your bike looks great! Thanks for sharing!
Yeah, that must be it, for some reason I think I remember reading that the pin locations were different. Your bike looks great too, love the gaiters. What bag is that? I really need one and that is about nicest I've seen as far as low key.


04-03-2015, 10:10 PM
Find Reply


Messages In This Thread
RE: Chip Beck Spec Low Handlebar/Mirrors Mod. - by coryredick_imp - 04-03-2015, 10:10 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  USB ON HANDLEBAR - connection at battery direct . Alfgaxatico_imp 38 2,494 05-17-2026, 10:20 PM
Last Post: Cormanus
  Quad Lock handlebar vs clutch perch and bar-end mirrors Uncle Sixer 1 299 01-04-2026, 01:26 PM
Last Post: pekingduck
  Handlebar control symmetry Uncle Sixer 17 1,570 08-07-2025, 05:24 AM
Last Post: Cormanus
  Stock Mirrors MrBob_imp 5 530 04-11-2025, 03:33 AM
Last Post: balkanhound_imp
  Mirrors Charlie Bravo_imp 6 554 09-12-2022, 09:27 PM
Last Post: GoldOxide_imp
  Handlebar Risers?? bubblerboy64_imp 16 1,369 07-16-2022, 06:04 AM
Last Post: calipo223_imp
  What to do with the handlebar mounts when converting to clip-on controls? misterprofessionality 7 662 04-08-2022, 03:41 AM
Last Post: misterprofessionality
  CB 1100 EX Handlebar original or other? MALACAY_imp 4 492 04-03-2022, 01:00 AM
Last Post: Cormanus
  CRG Bar end mirrors for 2017 CB1100ex Senna02_imp 5 534 01-20-2022, 06:47 AM
Last Post: Nachodaddy
  Handlebar from 919 motorider6_imp 10 846 05-27-2021, 12:47 PM
Last Post: Stichill_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)