Woodcraft clip on adapter - anyone interested?

[Ferrealls_imp]

Hello

I use the Google translator.
My question may be difficult to understand.

1. Is it possible to manufacture? As shown in the picture

- It seems to be able to use the clip-on angle adjustable.
- 1-3 inches mounted upside down it seems to be available Riser height low.

Welcome, nikechosun.

That's pretty easy to manufacture. It's the same basic setup as the Woodcraft adapter. I'm thinking of having something similar built by my machine shop. Angle adjustment would be easy with that setup. I'd be a little hesitant to turn those upside down without a keeper ring or lip to keep the clip-ons secure.