Woodcraft clip on adapter - anyone interested?

[Ferrealls_imp]

On a stock Ducati Monster ( my son has one) the switches go into those little screened indents in the tank. If those dents weren't there the switches would hit the tank. You sure a set up like that would clear the tank on a CB?

No, I'm not sure. That depends on the adapter plate. If the plate is set up to push the clip ons forward from the stock clamps, then it should be ok. My ultra low renthals in the stock clamps touch the tank when I crank the bars. But, if they were moved forward 1-2" I'd have the clearance I need. That's what stemmed all this.

I'm hoping I can be involved in the design phase if woodcraft goes for it. It's not looking like we'll hit the 25 mark. As a mechanical/aerospace engineer I do a lot of design work. Coming up with a bracket that will fit my needs shouldn't pose to much of a problem. I'll most likely design my own and have it built at my fab shop. Was just hoping to have something professionally made and distributed to help others out.