Installing New Grips

[Dynaguy_imp]

I can't address the CB1100, but I've replaced grips on a number of my bikes. They vary in what is required as you might expect. An air compressor helps a ton. On open grips like the Honda has, simply put your needle valve in you air compressor hose, slightly insert it under the end of the grip while encircling the end of the grip closest to the controls and when a little air is applied, the old girp can be simply slipped or "walked" off. The new grip can be attached pretty much the same way. Most new grips I have used are so tacky that glue is not needed. If your throttle grip is glued on, prepare for a long day.