ROX 5cm bar riser report

[jedd_imp]

I tried the rotating Rox risers, only to have found out that the rox wasn't able to be clamped down tight enough to prevent the bar from rotating. A firm push or tug was all it took to rotate them, despite cranking down heavily on the top clamp bolts like a gorilla. Thus, I returned them back to Rox.

I then decided to go with the fixed position of SW Motech offset risers. In the interim, however, I rotated my bar back, and then repositioned the levers to fit my arms' ergos. It's not ideal, but that accomplished my single goal: to scoot 1"-2" farther away from the gas tank so I dont' scratch tank w/ my zipper. That was 1 yr ago, and as of date, I have no problems having my bar rotated back and down