Steering yoke nut gps mount

[Micahgerv_imp]

Micah, I am assuming you are using the Ram mount that uses a rubber "stem" with an expanding grommet at the bottom. The rubber mounting really helps on vibration.

Yes exactly. I'm hoping the finished product is as streamline as I'm thinking it will be. I've heard good things about them and it's cheaper than getting the case for the quadlock that the bike came with.

Sent from my SM-G955U using Tapatalk

we just did this to my friends sprint gt. took a stock nut, drilled it, used ram mount ball and passed through hole, used nylock nut on other side, installed. done. have spare non drilled nut in spares box to reverse if need be.

Yeah I'm big on keeping the OEM parts around so I didn't want to drill it, but I found a nice black open nut for cheap enough.

Sent from my SM-G955U using Tapatalk

I would recommend looking at Honda part number 90304-MJ4-670 that costs about $10. It is an open top nut that fits over 100 different Hondas from 400cc to 1800cc covering 30 years. Usually it has a rubber plug.

I didn't try it on my own CB1100 (too lazy to pull the bars) but it's a good bet.

The steering nut socket size on all CB1100s is actually 30mm, like the open top nut.

Thanks for the info, I took the and think I found a suitable replacement, I guess we'll see in 2 weeks when the nut comes in!

Sent from my SM-G955U using Tapatalk
Thanks for the knowledge dump guys. I knew there wasn't much that hasn't been poked and prodded on the cb in this group. Waiting for parts to come in now.

Sent from my SM-G955U using Tapatalk