2017 base model - fender eliminator kit

[Moe_rider_imp]

Hi everyone - first post so please be gentle.

I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.

Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.

Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.

Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)

Many thanks.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Hi everyone - first post so please be gentle.

I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.

Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.

Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.

Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)

Many thanks.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi everyone - first post so please be gentle.

I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.

Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.

Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.

Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)

Many thanks.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Hi everyone - first post so please be gentle.

I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.

Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.

Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.

Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)

Many thanks.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.

Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible

Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
The bike is beautiful as is but I’d like to customize and that’s mainly why am going to buy one. Already have two other bikes lol