Delkevic exhaust, experience?

[Jd2ride]

Houtman, that is a great idea! Thanks again for your help!
MVK24 the stop isn't part of the muffler but the short pipe leading to it. It is the pipe between the muffler and O2 sensor pipe. Their systems are nice and come with everything you need. The only problem is they don't really have instructions, it's not that difficult to install after you figure out what they meant by their 1-4 numbering system. I found the order on a pic from this forum. It helps a lot since holding 4 header pipes by yourself is not easy. Once that's figured out, it's pretty straight forward.

The drill/screw would work, or you could do what I did when mine did the same thing.
I just used a bead of red high temp RTV and a new clamp. Reinstall the end can, tighten it all down and let it sit for at least 24 hours. No more slipping/ turning as the stand makes contact.