Delkevic exhaust, experience?

[Jambo_imp]

*update*
after a few weeks, and the system 'settled' in, the pipe from the collector to the mid pipe had shifted 'back' a bit more than i liked, was barely hanging on at the front gasket. this is the pipe with the hanger bracket. so, i made a 1" straight bracket to mount to the frame hanger to the midpipe, pushing the whole thing forward a bit into the collector. it was literally a 3/4" wide, 1.5" long 3/16" thick piece of steel with two 5/16" diameter holes drilled 1" apart from each other. i bolted it with a short M8 bolt and nut to the exhaust pipe bracket,, tightened it, and them mounted it back on the bike. I slid the whole system forward by loosening the clamp on the muffler and sliding it up in there. took maybe 30 mins. Maybe my bracket on the pipe was welded in the wrong place? not sure but easy to sort. (ptobably had more to do with headpipes shifting/bowing forward after a few heat cycles?)

"m in sc", do you have a pic (or can you take one) of the straight bracket you made and how it was installed? I have a Delkevic full system in the garage waiting to be installed.
Thanks!