Guhl Tune/Derestriction

[cj599_imp]

ive read in the ecm a modification is made so it will take a flash im not talking software
If you have tuned cars before- I'm confused... are you asking to see the changes he makes to the software data? That's not a 'picture'... it is numbers adjusted within numerous different tables...and certainly not shared as it is intellectual property.


im talking a physical modification that has too be done internally honda locks this ecm
Check out the dyno graph of a 2013 CB1100 before and after ECU reflash!

We have spent the last year reverse engineering the Honda flashing protocol and I believe that we are the ONLY aftermarket company that can reflash the Honda motorcycle ECUs through the front connector WITHOUT cutting or drilling into the ECU.

The standard 2013-14 CB1100 reflash includes:
Remapping the ignition timing for full power in all gears and more efficient combustion
Remove the top speed limiter

Options include:
Raising the rev limit. We are not an engine builder, so we are not able to offer rev limiter advice. I can tell you that most people do raise the rev limit 500 rpm. Speak to an engine builder for advice.

Installing a custom fuel map for full power. We have limited maps now, but we will be adding them regularly.

The cost is $375 and that includes standard overnight return shipping to the continental US. International shipping is available at additional cost. The customer is to pay all duties/taxes.

The in-house turnaround time is normally 1 day.

To get this done, box up your ECU with a note with your name, phone number, return shipping address, and email.
Ship it to:
4126 Oregon Pike
Ephrata, PA 17522

We will give you a call to discuss how you want your ECU flashed and get your payment information. We accept Visa, M/C, or Discover. You can also send a money order along with the ECU, if you wish.

Let us know if you have any additional questions.
Thanks,
Don Guhl
Guhl Motors
717-618-4212


seams he does it with out the physical mod interesting all the tuning cables i have discovered says it necessary to modify the ecu