Installation of a Smart Turn System [No Cut Mod]

[LayerCake_imp]

I understand the concerns about positioning the sensor module, under the tank in upright position must be challenging. But are you sure the box is gonna survive heat and water in the position shown ? That would be my biggest concern.

@powerdubs, never thought of this, ... can your flashing bulb flash at different frequencies (user selected) ?

I can't be 100% sure I guess time will tell.
The manual does not mention water ingress and it seems to have a seal were the wire exits the box. It does mention staying away from direct heat but I think that should not be a big problem at the current position.
Since I forgot to mention it here and only mentioned it in one of the "what did you do to your CB" threads and got PMed about it here some more information.

I'm personally pretty happy with the mod but there are some things to keep in mind.
Changing a lane right in front of a traffic light might lead to you needing to turn on the signal again once you stop at the light.
Some people have had issues during installation according to the reviews, those issues mostly sound to me like selecting the wrong thickness of foam pad for the indicator switch mod.
For the CB I used the smaller pads and they work just fine for me.
Sometimes when you change lanes very slowly it won't register immediately and the indicators will stay on a little longer until the timeout or you could flip the switch a second time to turn it off manually.
YMMV