3D printed strap adapters for the CB1100 mounting pegs

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode 3D printed strap adapters for the CB1100 mounting pegs
Author	Message

j3gq_imp Offline

Been There

Posts: 703
Threads: 78
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Sep 2020

RE: 3D printed strap adapters for the CB1100 mounting pegs

#32

They don't come with a spec, or a measurement (and I do not wanna break mine in a destructive test ...)
but they are good for 10kg each, at least, and a nub isn't needed, they won't come off unless you apply a little
force. Looks like the OP did a good job.

07-08-2022, 06:37 AM

« Next Oldest | Next Newest »

Messages In This Thread

3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 06-02-2022, 02:31 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Gone in 60 - 06-02-2022, 02:55 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Nachodaddy - 06-02-2022, 02:56 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by GoldOxide_imp - 06-02-2022, 03:17 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by the Ferret - 06-02-2022, 03:21 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Lord Popgun - 06-02-2022, 05:26 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Cormanus - 06-02-2022, 05:57 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by PowerDubs_imp - 06-02-2022, 05:58 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Nemo_imp - 06-02-2022, 06:39 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 06-02-2022, 06:42 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Nemo_imp - 06-02-2022, 07:00 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by misterprofessionality - 06-02-2022, 07:03 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by outback_imp - 06-02-2022, 07:35 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by peterbaron - 06-02-2022, 07:47 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by j3gq_imp - 06-02-2022, 08:21 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 06-10-2022, 10:36 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by j3gq_imp - 06-29-2022, 10:14 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by j3gq_imp - 06-30-2022, 01:34 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Gone in 60 - 06-30-2022, 02:11 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by nine876_imp - 07-01-2022, 05:19 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by peterbaron - 07-01-2022, 08:33 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by GoldOxide_imp - 07-01-2022, 11:31 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Fenianbastard_imp - 07-01-2022, 09:07 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 07-04-2022, 01:22 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Gone in 60 - 07-06-2022, 02:03 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by peterbaron - 07-06-2022, 05:00 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by GoldOxide_imp - 07-06-2022, 07:22 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Cormanus - 07-06-2022, 07:58 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by 1973cb750 - 07-07-2022, 10:09 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by GoldOxide_imp - 07-07-2022, 11:43 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by 1973cb750 - 07-08-2022, 03:35 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by j3gq_imp - 07-08-2022, 06:37 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 07-09-2022, 11:26 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by 1973cb750 - 07-10-2022, 12:04 AM

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Foot pegs	Nick_imp	3	425	01-02-2025, 04:14 AM Last Post: Tev62
	Honda Top box mounting	Lord Popgun	8	855	06-22-2023, 12:09 PM Last Post: Nachodaddy
	Phone mounting issues	ride4now_imp	37	2,721	09-29-2021, 05:42 AM Last Post: Cormanus
	3D Printed Parts	Phadreus_imp	13	941	08-19-2021, 01:47 AM Last Post: Gone in 60
	Mounting a garage door remote	Gone in 60	21	1,432	06-24-2021, 01:40 AM Last Post: Gone in 60
	Help me find parts to mount highway pegs please	LikeAfox_imp	23	1,774	05-24-2021, 10:03 PM Last Post: LikeAfox_imp
	New Seat, Pegs, etc.	aschem_imp	16	1,258	10-14-2020, 01:02 PM Last Post: dhubbard422_imp
	Highway Pegs	dbarkdoll_imp	4	434	07-10-2019, 10:52 AM Last Post: clearviewx
	New rider pegs	greekcb_imp	4	489	01-29-2019, 03:10 AM Last Post: greekcb_imp
	Has anyone looked into lowering the passenger pegs?	warman_imp	8	804	01-17-2019, 03:11 PM Last Post: GoldOxide_imp

View a Printable Version

Forum Jump:

Users browsing this thread: 2 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me