+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: 3D printed strap adapters for the CB1100 mounting pegs (/showthread.php?tid=8031)
3D printed strap adapters for the CB1100 mounting pegs - LayerCake_imp - 06-02-2022
I could not figure out if the pegs on the CB1100 are meant for any specific purpose or piece of luggage so I designed and 3D printed some adapters to make my straps look neater on my SW-MOTECH PRO Roadpack.
![[Image: 61d4540c2b2ae234e53d3bc875479a78.jpg]](https://cb1100forum.net/forum/uploads/imp/202206/61d4540c2b2ae234e53d3bc875479a78.jpg)
![[Image: 439116fcea96e2b01848805f1b5de4b8.jpg]](https://cb1100forum.net/forum/uploads/imp/202206/439116fcea96e2b01848805f1b5de4b8.jpg)
RE: 3D printed strap adapters for the CB1100 mounting pegs - Gone in 60 - 06-02-2022
Wow, that's great! You should sell those.
RE: 3D printed strap adapters for the CB1100 mounting pegs - Nachodaddy - 06-02-2022
Beautiful work, my friend. I doubt the original designers of those pegs ever dreamed something this nice would hang from them.
RE: 3D printed strap adapters for the CB1100 mounting pegs - GoldOxide_imp - 06-02-2022
Yeah, nicely done LayerCake.
Heck, one could just print a saddle for solo riding and storage for those particular days.
RE: 3D printed strap adapters for the CB1100 mounting pegs - the Ferret - 06-02-2022
Nicely done
RE: 3D printed strap adapters for the CB1100 mounting pegs - Lord Popgun - 06-02-2022
I want some. Hurry up and get 25 posts so you can sell them in the for sale section of the forum.
RE: 3D printed strap adapters for the CB1100 mounting pegs - Cormanus - 06-02-2022
Very neat.
RE: 3D printed strap adapters for the CB1100 mounting pegs - PowerDubs_imp - 06-02-2022
Yea- I'd buy those- and I like that bag as well!!
Good job!
RE: 3D printed strap adapters for the CB1100 mounting pegs - Nemo_imp - 06-02-2022
Very nice! I’ll buy a set if you ever produce them for sale.
RE: 3D printed strap adapters for the CB1100 mounting pegs - LayerCake_imp - 06-02-2022
Thank you folks.
I probably won't be selling them but if they don't weirdly break during the next few trips I'll upload them to printables so anyone can download them and get them 3D printed.
They are designed for the 20mm wide straps on the SW-MOTECH bags and need the strap to end in a loop.