3D printed strap adapters for the CB1100 mounting pegs

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode 3D printed strap adapters for the CB1100 mounting pegs
Author	Message

LayerCake_imp Offline

First Service Completed

Posts: 30
Threads: 5
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2022

RE: 3D printed strap adapters for the CB1100 mounting pegs

#10

Thank you folks.
I probably won't be selling them but if they don't weirdly break during the next few trips I'll upload them to printables so anyone can download them and get them 3D printed.
They are designed for the 20mm wide straps on the SW-MOTECH bags and need the strap to end in a loop.

06-02-2022, 06:42 AM

« Next Oldest | Next Newest »

Messages In This Thread

3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 06-02-2022, 02:31 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Gone in 60 - 06-02-2022, 02:55 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Nachodaddy - 06-02-2022, 02:56 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by GoldOxide_imp - 06-02-2022, 03:17 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by the Ferret - 06-02-2022, 03:21 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Lord Popgun - 06-02-2022, 05:26 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Cormanus - 06-02-2022, 05:57 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by PowerDubs_imp - 06-02-2022, 05:58 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Nemo_imp - 06-02-2022, 06:39 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 06-02-2022, 06:42 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Nemo_imp - 06-02-2022, 07:00 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by misterprofessionality - 06-02-2022, 07:03 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by outback_imp - 06-02-2022, 07:35 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by peterbaron - 06-02-2022, 07:47 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by j3gq_imp - 06-02-2022, 08:21 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 06-10-2022, 10:36 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by j3gq_imp - 06-29-2022, 10:14 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by j3gq_imp - 06-30-2022, 01:34 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Gone in 60 - 06-30-2022, 02:11 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by nine876_imp - 07-01-2022, 05:19 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by peterbaron - 07-01-2022, 08:33 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by GoldOxide_imp - 07-01-2022, 11:31 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Fenianbastard_imp - 07-01-2022, 09:07 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 07-04-2022, 01:22 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Gone in 60 - 07-06-2022, 02:03 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by peterbaron - 07-06-2022, 05:00 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by GoldOxide_imp - 07-06-2022, 07:22 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by Cormanus - 07-06-2022, 07:58 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by 1973cb750 - 07-07-2022, 10:09 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by GoldOxide_imp - 07-07-2022, 11:43 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by 1973cb750 - 07-08-2022, 03:35 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by j3gq_imp - 07-08-2022, 06:37 AM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by LayerCake_imp - 07-09-2022, 11:26 PM

RE: 3D printed strap adapters for the CB1100 mounting pegs - by 1973cb750 - 07-10-2022, 12:04 AM

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Foot pegs	Nick_imp	3	435	01-02-2025, 04:14 AM Last Post: Tev62
	Honda Top box mounting	Lord Popgun	8	864	06-22-2023, 12:09 PM Last Post: Nachodaddy
	Phone mounting issues	ride4now_imp	37	2,723	09-29-2021, 05:42 AM Last Post: Cormanus
	3D Printed Parts	Phadreus_imp	13	951	08-19-2021, 01:47 AM Last Post: Gone in 60
	Mounting a garage door remote	Gone in 60	21	1,438	06-24-2021, 01:40 AM Last Post: Gone in 60
	Help me find parts to mount highway pegs please	LikeAfox_imp	23	1,774	05-24-2021, 10:03 PM Last Post: LikeAfox_imp
	New Seat, Pegs, etc.	aschem_imp	16	1,267	10-14-2020, 01:02 PM Last Post: dhubbard422_imp
	Highway Pegs	dbarkdoll_imp	4	439	07-10-2019, 10:52 AM Last Post: clearviewx
	New rider pegs	greekcb_imp	4	489	01-29-2019, 03:10 AM Last Post: greekcb_imp
	Has anyone looked into lowering the passenger pegs?	warman_imp	8	810	01-17-2019, 03:11 PM Last Post: GoldOxide_imp

View a Printable Version

Forum Jump:

Users browsing this thread: 2 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me