16,000 Lumens Spot Lights to complement 2017 Led headlights

[17-CB-002]

Alain,

I have to ask about the hardware mounting your front camera to the mount. Mine did not come with a long screw and nut. Mine has a shorter screw that threads into one side of the camera clamp. Did yours come with that long screw?

The longer bolt was not included in the kit, I had one in my tool box.
I only used the knurled knob screw from the kit to attach to the bolt and disregarded everything else.
From the picture you can see that the bolt was a bit too long, i will have to cut it to proper length during the winter season.

Everet, see your personal email for more pictures.

This looks like the Toronto light house ! Well done , the only problem I start to see is that many bikes have such a large amount of lights on their bikes and do not put them on low beam in tunnels that it gets dangerous for riders coming from the opposite direction. I see this a lot on the BRP.

Yes, I hate that blinding lights too.
I do have a switch conveniently mounted so that I can easily and quickly turn it off so as not to blind the oncoming traffic.
Switch is part of the same clamp that holds the clutch reservoir.