04-27-2014, 02:44 AM
After reading a few other threads on what they did, I tried a quick method that may not be as sophisticated or engineered as well, but it works.
First one I just cut from a plastic lid, painted black, bought 4 bolts, 2 to mount the mount, and 2 to mount the plate to the mount and drilled the 4 holes..
Below shows original and black cut out with 4 holes from metal.
Plastic one, original compared to new.
And on the bike, I painted 2 of the bolts black since they show using this cheap/quick method.
![[Image: 7bc48ce28884f8f328637b37766ee087.JPG]](https://cb1100forum.net/forum/uploads/imp/201404/7bc48ce28884f8f328637b37766ee087.JPG)
First one I just cut from a plastic lid, painted black, bought 4 bolts, 2 to mount the mount, and 2 to mount the plate to the mount and drilled the 4 holes..
Below shows original and black cut out with 4 holes from metal.
Plastic one, original compared to new.
And on the bike, I painted 2 of the bolts black since they show using this cheap/quick method.