07-07-2014, 11:07 AM
(07-07-2014, 08:54 AM)rockster5_imp Wrote: CBXBob, appreciate you posting that. Have a request-if it is not too much trouble; please post pictures of the baffle hole so we can see where it is at and the 1.5k ohm resistor as installed. Both the stuttling (or whatever it's called) and the desire for a bit more sound are both things I'd be interested in.
Just look down the tailpipe with a light and the baffle is about 10'" deep you can see it. It is just like a wall slightly off center due to slant of the pipe. There is also one on the inlet of the muffler. The muffler comes off by removing the mount bolt, loosening the clamp on the inlet and twisting slightly. The IAT sensor is under the left side cover. it is the most forward plug facing in.the other plugs face fore and aft. I will try pics but don't have much luck transferring from the camera to the forum.