06-26-2014, 03:10 AM
Best way! Swap out the front sprocket to a 17 tooth and hang on tight ! Lol. Swapping the front down one tooth you can still use the stock chain length by just tighting the chain and the front sprocket is cheaper to buy! There is a website where they can make any sprocket you want. But I'm sure another oem honda front 17 tooth sprocket will fit your bike.
I would say you could pull the front tire off the ground by just gassing it with out having to dump the clutch. 1 tooth down on front on a street bike makes a huge difference. You will hit your 112mph speed limiter very fast in 4th gear and still have 5th gear ready for the ECM reflash
I would say you could pull the front tire off the ground by just gassing it with out having to dump the clutch. 1 tooth down on front on a street bike makes a huge difference. You will hit your 112mph speed limiter very fast in 4th gear and still have 5th gear ready for the ECM reflash