04-19-2015, 08:38 AM
(04-19-2015, 07:26 AM)Elipten_imp Wrote: First pull the flexible black piece out of the connector slightly.. Do not break it. Pinch the green tabs inward and pull the connection fee. It is not easy, and not much room. I prop up tank wit a small 2"x 4". Look in their with a flash light. The shop manual tell to lube the tube with some engine oil for assembly.
It does help to lube. Reverse order at assembly.
Sent from my iPad using Tapatalk
Thank u so much
(04-19-2015, 07:16 AM)jerrycon_imp Wrote: Here's a little bit about it:
http://cb1100forum.com/forum/showthread.php?tid=5331
Good luck, JB. I watched a video, but didn't find it much help. The guy did it very quickly and there were no close-ups of what he did.
https://www.youtube.com/watch?v=-BsZk3Bq3Ok#t=77
Thank u
(04-19-2015, 07:26 AM)Elipten_imp Wrote: First pull the flexible black piece out of the connector slightly.. Do not break it. Pinch the green tabs inward and pull the connection fee. It is not easy, and not much room. I prop up tank wit a small 2"x 4". Look in their with a flash light. The shop manual tell to lube the tube with some engine oil for assembly.
It does help to lube. Reverse order at assembly.
Sent from my iPad using Tapatalk
Well I was just trying to wire up a receptacle for my cell phone or gps ... I bought a water proof cigarette plug with a handle bar mount ... I put it all back together as I was afraid I was going to break that fuel line ... I'd really like to see it done first ... I would be upset with myself if I broke that fuel line assembly ... Lol
(04-19-2015, 07:26 AM)Elipten_imp Wrote: First pull the flexible black piece out of the connector slightly.. Do not break it. Pinch the green tabs inward and pull the connection fee. It is not easy, and not much room. I prop up tank wit a small 2"x 4". Look in their with a flash light. The shop manual tell to lube the tube with some engine oil for assembly.
It does help to lube. Reverse order at assembly.
Sent from my iPad using Tapatalk
I do appreciate your info Elipten ,,, I had the tank propped up with a 2x4 and a flashlight looking at the connector ... I was just so afraid of breaking it ,, I will try again another day ...
