06-21-2016, 07:31 PM
So, the alarm installed. It is easy
Under plastic box for instruments there are unused socket for accessories.
There are all we need
+12V
+ turn signal
+ turn signal
GROUND
+Tail light
We are using connector kit GEN-1 from alarm.
I bought connector and terminals for modification of GEN-1
that will be the HM at the top, ot the MT 6 pin towards the bottom of the page, the only difference is, one will have a mounting bracket slot and the other will not. http://www.cycleterminal.com/hm-sealed-series-090.html
So, now it is just Plug&Play.
Under plastic box for instruments there are unused socket for accessories.
There are all we need
+12V
+ turn signal
+ turn signal
GROUND
+Tail light
We are using connector kit GEN-1 from alarm.
I bought connector and terminals for modification of GEN-1
that will be the HM at the top, ot the MT 6 pin towards the bottom of the page, the only difference is, one will have a mounting bracket slot and the other will not. http://www.cycleterminal.com/hm-sealed-series-090.html
So, now it is just Plug&Play.
