03-13-2017, 11:05 AM
Yes. The front signals are always on. They blink when you select left or right turn signals or emergency flasher.
I took a quick look at the wiring diagram and all that is controlled by the Turn Signal-Position Relay. It has two 4 pin connectors
The bulbs are connected to chassis ground on one side and the other goes directly to the relay. Switch inputs also go there to tell it to flash the signals or blink all the lights if the emergency flasher is selected.
It MAY be as easy as swapping in a TurnSignal-Position Relay from a US model, or a European model that has front signals on all the time. Would have to see a diagram for your bike.
I took a quick look at the wiring diagram and all that is controlled by the Turn Signal-Position Relay. It has two 4 pin connectors
The bulbs are connected to chassis ground on one side and the other goes directly to the relay. Switch inputs also go there to tell it to flash the signals or blink all the lights if the emergency flasher is selected.
It MAY be as easy as swapping in a TurnSignal-Position Relay from a US model, or a European model that has front signals on all the time. Would have to see a diagram for your bike.