05-06-2017, 10:38 AM
Wood, I remembered a craftsman's set that did the trick for me last time. I went and found it and took a photo,
[url=http://s1168.photobucket.com/user/lester9/media/Mobile%20Uploads/20170506_172600_zpsoc2to7rl.jpg.html]![[Image: cec6b3eb534dfdd11580afee9b64a028.jpg]](https://cb1100forum.net/forum/uploads/imp/201705/cec6b3eb534dfdd11580afee9b64a028.jpg)
[url=http://s1168.photobucket.com/user/lester9/media/Mobile%20Uploads/20170506_172610_001_zps3c9nuiid.jpg.html]![[Image: 981e975fcbd6be5fc747830074d26080.jpg]](https://cb1100forum.net/forum/uploads/imp/201705/981e975fcbd6be5fc747830074d26080.jpg)
It includes the drill bit and the extractor in one piece. The smallest is for 6mm. You drill in, with the extractor backed off, and once deep enough you start turning in the extractor with a wrench. It is all done counter clockwise so when it bottems out it starts turning the bold via wrenching the extractor. Again, best of luck!
Sent from my SM-T710 using Tapatalk
[url=http://s1168.photobucket.com/user/lester9/media/Mobile%20Uploads/20170506_172600_zpsoc2to7rl.jpg.html]
[url=http://s1168.photobucket.com/user/lester9/media/Mobile%20Uploads/20170506_172610_001_zps3c9nuiid.jpg.html]
It includes the drill bit and the extractor in one piece. The smallest is for 6mm. You drill in, with the extractor backed off, and once deep enough you start turning in the extractor with a wrench. It is all done counter clockwise so when it bottems out it starts turning the bold via wrenching the extractor. Again, best of luck!
Sent from my SM-T710 using Tapatalk