Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
 Beam adjustment screw :)
#8
(02-12-2016, 10:50 AM)The ferret_imp Wrote: Hmm I was looking at the hand and camera reflection and that white line, and they all looked the same. Didn't notice the rim pivoting horizontally, although I clearly see that now. However, I also don't understand how the horizontal adj has anything to do with the vertical adjustment.

it has nothing to do with it Smile I was just mentioning that there are 2 adjustment options for the direction of the headlights.
Adjust up and down at the 'ears' its horizontal

Left to right adjustment is vertical....


(02-12-2016, 11:48 AM)Bob Sdaman_imp Wrote: On a bike where the headlight turns with the bars, I was at first baffled as to why Honda thought this adjustment was necessary. But the more I thought about it, I guess it makes good sense. Even if they attempted to make them perfectly straight from the factory, could there be a margin of error? This allows each bike to be adjusted to a suitable or desired precision.

Though I hate to admit it, I found this adjuster screw by accident. When I first went to disassemble the lamp to install the LED, I started here first.
After turning and turning and turning for what I found to be much too long of a time, there it was.....my headlamp was awkwardly turned hard to the left.
Definitely one of those "ah ha" moments.

indeed, i thought it was funny when i discovered that tweak option Smile

I accidentally discovered it too when removing the headlight assembly Smile
Reply


Messages In This Thread
 Beam adjustment screw :) - by Riko_imp - 02-12-2016, 07:11 AM
RE: Beam adjustment screw :) - by the Ferret - 02-12-2016, 07:16 AM
RE: Beam adjustment screw :) - by Riko_imp - 02-12-2016, 07:24 AM
RE: Beam adjustment screw :) - by rbike_imp - 02-12-2016, 09:50 AM
RE: Beam adjustment screw :) - by Riko_imp - 02-12-2016, 10:02 AM
RE: Beam adjustment screw :) - by the Ferret - 02-12-2016, 10:50 AM
RE: Beam adjustment screw :) - by Riko_imp - 02-12-2016, 06:39 PM
RE: Beam adjustment screw :) - by the Ferret - 02-13-2016, 02:48 AM
RE: Beam adjustment screw :) - by rbike_imp - 02-13-2016, 04:15 AM
RE: Beam adjustment screw :) - by Riko_imp - 02-13-2016, 06:04 AM
RE: Beam adjustment screw :) - by PowerDubs_imp - 06-11-2017, 07:27 AM
RE: Beam adjustment screw :) - by Riko_imp - 06-11-2017, 07:49 AM
RE: Beam adjustment screw :) - by White Dog_imp - 06-11-2017, 10:50 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Valve Adjustment Shims dave 13 709 07-28-2026, 12:49 PM
Last Post: MagnaRider
  JIS screw drivers Ridem32_imp 26 1,731 06-12-2026, 06:56 PM
Last Post: Gone in 60
  Valve Adjustment and Camshaft Removal dave 5 634 03-21-2026, 04:49 PM
Last Post: Cormanus
  Valve Adjustment dave 6 867 08-29-2025, 10:46 AM
Last Post: dave
  Valve Adjustment Intervals CBRider_imp 32 2,996 04-21-2025, 02:24 PM
Last Post: Jurlie_imp
  Rear Brake Pedal Adjustment Gone in 60 12 1,156 04-04-2024, 08:18 AM
Last Post: Gone in 60
  Sight Glass Screw Mickey Dublin_imp 16 1,610 11-22-2023, 08:25 AM
Last Post: peterbaron
  Valve Adjustment Tolerances - How Far Do You Go? dave 14 1,541 10-18-2023, 09:28 PM
Last Post: The Gecko_imp
  Front forks adjustment Olyrider 5 525 05-16-2022, 11:04 PM
Last Post: Sparky80_imp
  Brake reservoir screw head issue satchit 72 5,434 04-24-2022, 11:55 PM
Last Post: Houtman_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)