12-10-2017, 06:53 PM
(12-10-2017, 03:32 PM)Nortoon_imp Wrote: The front brakes on my 2017 CB1100 EX squeal just before stopping.
But they do work well.
The rear brake dragged and discoloured the disk.
Honda Canada approved having the disk and brakes pads changed.
Now the rear brake is mush and still drags.
I assume there is now air in the line.
Never had this problem with my 2013 CB500XA.
As far as i understand the part that returns the caliper is the square o ring that seals the fluid, it deforms when the brake is applied, stretches whilst holding on to the caliper and returns to it's original shape once the pressure is released,thereby providing the small gap to free the disk, it may have been affected by the heat and may have to be replaced together with a good clean of the caliper and housing to ensure smooth operation.
Max