Motorcycle doesn't start, high oil temperature indicator comes on

[SportsterDoc]

Confirm high engine oil temp on speedo, not low oil pressure on tach?

The warning lights on the lower portion of the speedometer, from left to right, are:
CEL (orange)
Neutral (green)
Hi beam (blue)
Engine oil temp hi (red)

The warning light on the lower portion of the tachometer is
Low oil pressure (red)

What is your battery voltage (a) key off, (b) key on, © pressing start button?

So when I turn the key to the on position, the high engine oil temperature indicator lights up. Then when I turn the kill switch to the run position, the indicator goes off. I press the start button and the I hear a low whine and nothing happens.

Do you have a voltmeter?

If so, what is your battery voltage (a) key off, (b) key on, © pressing start button?

Confirm light Engine oil temp hi (red), bottom right of speedo, not the warning light on the lower portion of the tachometer for Low oil pressure (red), which is normally on with key, but engine not running.

That is right. Per the owners manual, it is the engine oil temp high (red) indicator is on which looks like a gas pump nozzle with a thermometer on top of it.

On my 2014 standard, turning the key on illuminates the hi EOT indicator for a second or two, whether stop/run is off or on.

Let me check the battery voltage tonight.

Thanks for your suggestions.

Good, most likely battery, unless cable connections are not secure.
Best to first check cable connections to be wrench tight.