07-15-2018, 09:06 AM
saarang since the bike ran ok before it was stored for some days i would check the engine oil temperature sensor connector for good connections, it lives on the back of the cylinders in the middle below the cam chain tensioner.
first thing to check is pushing the connector onto the sensor, if it clicks "home" you have likely found the answer, if it is put on properly it may be worth pulling it off and see if the contacts are ok and in place.
these are small pins so be careful.
also switch the bike on with the connector unplugged and see if the eot light is still on.
first thing to check is pushing the connector onto the sensor, if it clicks "home" you have likely found the answer, if it is put on properly it may be worth pulling it off and see if the contacts are ok and in place.
these are small pins so be careful.
also switch the bike on with the connector unplugged and see if the eot light is still on.