Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Front head light position
#3
(10-10-2018, 04:02 AM)Ennsync_imp Wrote: Hello forumHello
I have my CB 1100 in the garage and looks perfect to my eyes.
I have 2 other bikes right now and have learned about them and their needs , this one however is very new to me. so you will see me posting a lot of questions to the forum.
I needed to ride the CB at night , I was riding in the city and streets and freeway were very well illuminated by lights.
I however realized the front head light ,either at high or low beam focuses at something like 10 feet in front of me.
I don't know if it is because of windshield bracket installed that limits the movement of light or it is the factory design. I think I have dart windshield and bracket. Thanks
Thank you
Ride safe/Ride long

i actually had the exact same issue early on, and I noticed it after installing my own Dart screen. if you just loosen those two bolts on the side, tilt the lamp up a bit, and retighten them it will be much better. after I adjusted the angle my low beam is catching objects way out in front of me.

I'm still going to swap to an LED lamp at some point though.
Reply


Messages In This Thread
Front head light position - by Ennsync_imp - 10-10-2018, 04:02 AM
RE: Front head light position - by MaFiHa_imp - 10-10-2018, 04:06 AM
RE: Front head light position - by misterprofessionality - 10-10-2018, 04:24 AM
RE: Front head light position - by Ennsync_imp - 10-10-2018, 05:21 AM
RE: Front head light position - by Cormanus - 10-10-2018, 08:09 AM
RE: Front head light position - by Ennsync_imp - 10-11-2018, 03:28 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Brake reservoir screw head issue satchit 72 5,343 04-24-2022, 11:55 PM
Last Post: Houtman_imp
  Chrome cylinder head cap Juancho76_imp 21 1,639 04-03-2022, 08:48 AM
Last Post: Juancho76_imp
  Cams, Compression, Head Work? boynton6spd_imp 12 968 08-08-2021, 02:27 AM
Last Post: old blue_imp
  CB900 Custom oil stopper on valve head AOrhun_imp 9 791 01-27-2021, 10:06 PM
Last Post: Houtman_imp
  Fork Tube hex head bolt tool fitment ? bflint 8 714 11-30-2020, 06:24 PM
Last Post: jtopiso_imp
  Cylinder Head cover oil leak and valve clearance increase. zirconxi_imp 6 650 09-01-2020, 12:19 AM
Last Post: peterbaron
  JIS Cross Head Screw Drivers 2017EX_imp 15 1,333 04-15-2020, 01:53 AM
Last Post: peterbaron
  running light and brake light Ennsync_imp 3 431 01-02-2019, 11:24 PM
Last Post: GoldOxide_imp
   H4 Head light Bulb Question Ennsync_imp 36 2,513 12-30-2018, 01:48 PM
Last Post: GoldOxide_imp
  Speedometer Allen Head screw loose mhicks17_imp 1 257 09-15-2018, 02:55 PM
Last Post: max

Forum Jump:


Users browsing this thread: 1 Guest(s)