11-23-2019, 01:52 PM
(11-23-2019, 01:01 PM)max_imp Wrote: Was it anything like this?
https://www.youtube.com/watch?v=CztY7oUtr74
My bearings were fine but the swingarm had to be "locked in" i used a shim but others just tightened the big bolt up, look at the wear on the bolt, it had been functioning as a bearing, the "bushing" is actually two needle bearings on the chain side and one on the brake side, standard honda big bike swingarm setup.
Hope this helps.
Very interesting. Looks similar to my issue. I should pass this video along to the service department.
(11-23-2019, 01:02 PM)GoldOxide_imp Wrote: Huh, wow. Half inch does seem much, certainly seems more than normal wear 'n' tear due to use.
Right? 42K miles, 70% of them straight line on the freeway. How could I possibly have worn this bearing to death?
I reviewed some footage and my videos are useful. Stand by while I remember how to post them.
Quick video clips. Hope the links work.
https://www.dropbox.com/s/k3zbnaly85jg39...M.mov?dl=0
https://www.dropbox.com/s/m0caawqq1cydl5...M.mov?dl=0
https://www.dropbox.com/s/l6luj5qd5wm9fh...M.mov?dl=0