The CB1100 Community Forum › Honda CB1100 Discussions › Mechanical & Technical v
Swing arm bushing failure

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Swing arm bushing failure
max Offline
Road Warrior
Posts: 1,298
Threads: 39
Likes Received: 15 in 8 posts
Likes Given: 0
Joined: Apr 2025
#2
11-23-2019, 01:01 PM
Was it anything like this?
https://www.youtube.com/watch?v=CztY7oUtr74

My bearings were fine but the swingarm had to be "locked in" i used a shim but others just tightened the big bolt up, look at the wear on the bolt, it had been functioning as a bearing, the "bushing" is actually two needle bearings on the chain side and one on the brake side, standard honda big bike swingarm setup.
Hope this helps.
Find
Reply


Messages In This Thread
Swing arm bushing failure - by egleaves_imp - 11-23-2019, 12:33 PM
RE: Swing arm bushing failure - by max - 11-23-2019, 01:01 PM
RE: Swing arm bushing failure - by egleaves_imp - 11-23-2019, 01:52 PM
RE: Swing arm bushing failure - by Dave_imp - 11-29-2019, 04:45 AM
RE: Swing arm bushing failure - by max - 11-29-2019, 07:22 AM
RE: Swing arm bushing failure - by Dave_imp - 11-29-2019, 10:48 AM
RE: Swing arm bushing failure - by egleaves_imp - 12-03-2019, 05:02 AM
RE: Swing arm bushing failure - by the Ferret - 12-03-2019, 06:31 AM
RE: Swing arm bushing failure - by max - 12-03-2019, 06:50 AM
RE: Swing arm bushing failure - by egleaves_imp - 12-03-2019, 07:03 AM
RE: Swing arm bushing failure - by Lord Popgun - 12-03-2019, 07:55 AM
RE: Swing arm bushing failure - by egleaves_imp - 12-03-2019, 08:09 AM
RE: Swing arm bushing failure - by the Ferret - 12-03-2019, 09:16 AM
RE: Swing arm bushing failure - by peterbaron - 12-03-2019, 09:31 AM
RE: Swing arm bushing failure - by Cormanus - 12-03-2019, 02:42 PM
RE: Swing arm bushing failure - by max - 12-03-2019, 05:30 PM
RE: Swing arm bushing failure - by egleaves_imp - 12-04-2019, 04:54 AM
RE: Swing arm bushing failure - by max - 12-09-2019, 02:05 PM
RE: Swing arm bushing failure - by max - 12-10-2019, 06:02 AM
RE: Swing arm bushing failure - by max - 12-10-2019, 07:18 AM
RE: Swing arm bushing failure - by max - 12-10-2019, 04:02 PM
RE: Swing arm bushing failure - by Randy B - 12-10-2019, 10:36 PM
RE: Swing arm bushing failure - by egleaves_imp - 12-12-2019, 09:27 AM
RE: Swing arm bushing failure - by peterbaron - 12-12-2019, 09:32 AM
RE: Swing arm bushing failure - by egleaves_imp - 12-12-2019, 01:12 PM
RE: Swing arm bushing failure - by max - 12-12-2019, 02:00 PM
RE: Swing arm bushing failure - by max - 12-13-2019, 03:22 AM
RE: Swing arm bushing failure - by egleaves_imp - 12-13-2019, 04:34 AM
RE: Swing arm bushing failure - by peterbaron - 12-13-2019, 04:49 AM
RE: Swing arm bushing failure - by egleaves_imp - 12-13-2019, 04:55 AM
RE: Swing arm bushing failure - by max - 12-13-2019, 05:03 AM
RE: Swing arm bushing failure - by the Ferret - 12-13-2019, 05:10 AM
RE: Swing arm bushing failure - by max - 12-13-2019, 05:29 AM
RE: Swing arm bushing failure - by peterbaron - 12-14-2019, 01:37 AM
RE: Swing arm bushing failure - by max - 12-14-2019, 03:53 AM
RE: Swing arm bushing failure - by max - 12-15-2019, 09:22 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Another oil filter failure dsan1964_imp 28 1,865 09-02-2020, 10:07 PM
Last Post: apex1_imp
  Oil filter failure.... Complete loss of oil pressure x(why)z_imp 49 2,824 09-14-2017, 10:12 PM
Last Post: paulw_imp
   Complete Electrical Failure Ulvetanna_imp 21 1,458 10-24-2016, 12:43 PM
Last Post: Ulvetanna_imp
  Swing-arm torque HaGut_imp 10 657 03-22-2015, 05:24 PM
Last Post: Cormanus
  Shock Bushing Sizes?? aschem_imp 4 316 03-07-2015, 01:39 PM
Last Post: the Ferret

Forum Jump:


Users browsing this thread: 2 Guest(s)