Login

Gone in 60 · 02-11-2021, 03:46 AM

If the Triumph fork gaiters fit the CB, and if anyone is interested:
https://www.triumphrat.net/threads/new-i...18.978820/

mvk24_imp · 02-11-2021, 04:15 AM

They do fit, I have triumph gaiters on my 2014

Sent from my SM-G965U1 using Tapatalk

GoldOxide_imp · 02-11-2021, 04:23 AM

I used Kawasaki OEM Part 49006-1335 and the fit 'n' finish was very good and durable after all day sunshine, everyday. Never had to treat them with any protectant.

mvk24_imp · 02-11-2021, 04:41 AM

(02-11-2021, 04:23 AM)GoldOxide_imp Wrote: I used Kawasaki OEM Part 49006-1335 and the fit 'n' finish was very good and durable after all day sunshine, everyday. Never had to treat them with any protectant.

I hit mine with some armor all just to be preventative Smile

gives it that glossy rubber look lol

Sent from my SM-G965U1 using Tapatalk

Rox_imp · 02-11-2021, 01:28 PM

I got mine off Amazon for a 41mm fork. They work fine $40. They look like they were made for a Sportster but I like them....

tod.branko_imp · 02-11-2021, 01:59 PM

Yup, mine are made for a Street Twin, perfect fit.

'14 CB1100 STD 5 speed

bioman_imp · 02-12-2021, 03:53 AM

I am getting interested in these gaiters! I found some cheaper (than OEM Kawa) options on the interweb. The top I should look at is 41mm - but can someone tell me what the diameter is of the bottom? And the length?

mvk24_imp · 02-12-2021, 04:02 AM

Mine are already on the bike so it wouldn't be possible to stretch it out on the fork to get a length measurement for you. However this is the exact listing I ordered.. for 24$ by the time you measure the diameters for something cheaper it could already be shipped to ya Wink

. https://www.ebay.com/itm/162276226225 [Image: 20027b1ff4bb6283eaeb8e482956700c.jpg]

Sent from my SM-G965U1 using Tapatalk
Those gaiters on my bike [Image: b26edd9840f0babfed12f5791f21aac7.jpg]

Sent from my SM-G965U1 using Tapatalk
Aside from looks they will also help keep those fork seals cleaner for longer, before I installed i made sure I wiped the fork tube down with some corrosion inhibiter. However it had a great seal to the fork to keep water out, they have a hole at the bottom to allow any moisture to drain out though as a fail safe.

Sent from my SM-G965U1 using Tapatalk

Rocky_imp · 02-12-2021, 05:28 AM

Triumph gaiters are what I installed on my CB - and my Triumph too

mvk24_imp · 02-12-2021, 06:26 AM

(02-12-2021, 05:28 AM)Rocky_imp Wrote: Triumph gaiters are what I installed on my CB - and my Triumph too

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Fork Gaiters and Heated Grips	tdbru	20	2,437	05-02-2025, 11:16 PM Last Post: Cormanus
	Fork Gaiters - buyer beware	12cb96vfr_imp	53	2,567	04-13-2025, 05:04 AM Last Post: balkanhound_imp
	ID these fork boots/ fork gaiters	Riko_imp	9	606	12-18-2017, 09:43 AM Last Post: LongRanger_imp
	New fork gaiters and plastidip under fender.	Jaychaynes_imp	7	503	04-03-2017, 12:12 AM Last Post: SSK Dave_imp
	Kawasaki vs. Kijima Gaiters	White Dog_imp	2	267	12-18-2016, 10:13 PM Last Post: the Ferret
	Fork Boots (Front Gaiters)	venturer434_imp	16	955	11-04-2016, 09:19 PM Last Post: the Ferret
	Triumph fork gaiters are great!	Olyrider	15	934	03-26-2016, 05:24 PM Last Post: TINK_imp
	Fork gaiters installed - thanks Ferret!	Rebel73_imp	9	1,006	01-30-2016, 01:26 AM Last Post: the Ferret
	Gaiters for my CB	Grinton_imp	6	426	05-08-2015, 05:45 PM Last Post: TINK_imp
	Kawasaki gaiters part number?	VTR1000F_imp	5	331	01-11-2015, 11:12 PM Last Post: VTR1000F_imp

Threaded Mode Fork Gaiters
Author	Message