+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Fork Gaiters (/showthread.php?tid=8250)
Pages:
1
2
Fork Gaiters - Gone in 60 - 02-11-2021
If the Triumph fork gaiters fit the CB, and if anyone is interested:
https://www.triumphrat.net/threads/new-in-box-fork-gaiters-triumph-a9638018.978820/
Fork Gaiters - mvk24_imp - 02-11-2021
They do fit, I have triumph gaiters on my 2014
Sent from my SM-G965U1 using Tapatalk
RE: Fork Gaiters - GoldOxide_imp - 02-11-2021
I used Kawasaki OEM Part 49006-1335 and the fit 'n' finish was very good and durable after all day sunshine, everyday. Never had to treat them with any protectant.
RE: Fork Gaiters - mvk24_imp - 02-11-2021
(02-11-2021, 04:23 AM)GoldOxide_imp Wrote: I used Kawasaki OEM Part 49006-1335 and the fit 'n' finish was very good and durable after all day sunshine, everyday. Never had to treat them with any protectant.I hit mine with some armor all just to be preventative
gives it that glossy rubber look lol Sent from my SM-G965U1 using Tapatalk
RE: Fork Gaiters - Rox_imp - 02-11-2021
I got mine off Amazon for a 41mm fork. They work fine $40. They look like they were made for a Sportster but I like them....
Fork Gaiters - tod.branko_imp - 02-11-2021
Yup, mine are made for a Street Twin, perfect fit.
'14 CB1100 STD 5 speed
RE: Fork Gaiters - bioman_imp - 02-12-2021
I am getting interested in these gaiters! I found some cheaper (than OEM Kawa) options on the interweb. The top I should look at is 41mm - but can someone tell me what the diameter is of the bottom? And the length?
Fork Gaiters - mvk24_imp - 02-12-2021
Mine are already on the bike so it wouldn't be possible to stretch it out on the fork to get a length measurement for you. However this is the exact listing I ordered.. for 24$ by the time you measure the diameters for something cheaper it could already be shipped to ya
. https://www.ebay.com/itm/162276226225![[Image: 20027b1ff4bb6283eaeb8e482956700c.jpg]](https://cb1100forum.net/forum/uploads/imp/202102/20027b1ff4bb6283eaeb8e482956700c.jpg)
Sent from my SM-G965U1 using Tapatalk
Those gaiters on my bike
![[Image: b26edd9840f0babfed12f5791f21aac7.jpg]](https://cb1100forum.net/forum/uploads/imp/202102/b26edd9840f0babfed12f5791f21aac7.jpg)
Sent from my SM-G965U1 using Tapatalk
Aside from looks they will also help keep those fork seals cleaner for longer, before I installed i made sure I wiped the fork tube down with some corrosion inhibiter. However it had a great seal to the fork to keep water out, they have a hole at the bottom to allow any moisture to drain out though as a fail safe.
Sent from my SM-G965U1 using Tapatalk
RE: Fork Gaiters - Rocky_imp - 02-12-2021
Triumph gaiters are what I installed on my CB - and my Triumph too
RE: Fork Gaiters - mvk24_imp - 02-12-2021
(02-12-2021, 05:28 AM)Rocky_imp Wrote: Triumph gaiters are what I installed on my CB - and my Triumph tooHow do you like the tank pads? I was thinking of getting them for mine.
Sent from my SM-G965U1 using Tapatalk