Login

1973cb750 · 07-08-2022, 03:35 AM

how much weight will they hold? 3d printed stuff i have no experience with

j3gq_imp · 07-08-2022, 06:37 AM

They don't come with a spec, or a measurement (and I do not wanna break mine in a destructive test ...)
but they are good for 10kg each, at least, and a nub isn't needed, they won't come off unless you apply a little
force. Looks like the OP did a good job.

LayerCake_imp · 07-09-2022, 11:26 PM

(07-08-2022, 03:35 AM)1973cb750_imp Wrote: how much weight will they hold? 3d printed stuff i have no experience with

How much they will be able to hold depends on print settings and material you could print them in titanium ... probably expensive and not worth it but you could.
That's why on the page I mention you should test them and make sure you are comfortable with them as I can give zero guaranties about how they will behave on your bike.
For me printed in PETG on a Prusa i3 MK3 they are a snug fit no room to add a bump they just would not fit with one anymore. They are not meant to be left on the bike they're meant to stay with the luggage as prolonged exposure to the elements is probably not ideal for most plastics even if this print is pretty chunky.

1973cb750 · 07-10-2022, 12:04 AM

(07-09-2022, 11:26 PM)LayerCake_imp Wrote:
(07-08-2022, 03:35 AM)1973cb750_imp Wrote: how much weight will they hold? 3d printed stuff i have no experience with

How much they will be able to hold depends on print settings and material you could print them in titanium ... probably expensive and not worth it but you could.
That's why on the page I mention you should test them and make sure you are comfortable with them as I can give zero guaranties about how they will behave on your bike.
For me printed in PETG on a Prusa i3 MK3 they are a snug fit no room to add a bump they just would not fit with one anymore. They are not meant to be left on the bike they're meant to stay with the luggage as prolonged exposure to the elements is probably not ideal for most plastics even if this print is pretty chunky.

How much they will be able to hold depends on print settings and material you could print them in titanium ... probably expensive and not worth it but you could.
That's why on the page I mention you should test them and make sure you are comfortable with them as I can give zero guaranties about how they will behave on your bike.
For me printed in PETG on a Prusa i3 MK3 they are a snug fit no room to add a bump they just would not fit with one anymore. They are not meant to be left on the bike they're meant to stay with the luggage as prolonged exposure to the elements is probably not ideal for most plastics even if this print is pretty chunky.
im not interested in printing them i can invest in those i would have to use a 3rd party or buy them from some one

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Foot pegs	Nick_imp	3	325	01-02-2025, 04:14 AM Last Post: Tev62
	Honda Top box mounting	Lord Popgun	8	677	06-22-2023, 12:09 PM Last Post: Nachodaddy
	Phone mounting issues	ride4now_imp	37	2,000	09-29-2021, 05:42 AM Last Post: Cormanus
	3D Printed Parts	Phadreus_imp	13	741	08-19-2021, 01:47 AM Last Post: Gone in 60
	Mounting a garage door remote	Gone in 60	21	1,082	06-24-2021, 01:40 AM Last Post: Gone in 60
	Help me find parts to mount highway pegs please	LikeAfox_imp	23	1,388	05-24-2021, 10:03 PM Last Post: LikeAfox_imp
	New Seat, Pegs, etc.	aschem_imp	16	967	10-14-2020, 01:02 PM Last Post: dhubbard422_imp
	Highway Pegs	dbarkdoll_imp	4	348	07-10-2019, 10:52 AM Last Post: clearviewx
	New rider pegs	greekcb_imp	4	381	01-29-2019, 03:10 AM Last Post: greekcb_imp
	Has anyone looked into lowering the passenger pegs?	warman_imp	8	659	01-17-2019, 03:11 PM Last Post: GoldOxide_imp

Threaded Mode 3D printed strap adapters for the CB1100 mounting pegs
Author	Message