Posts: 236
Threads: 27
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2019
Clumsy me drop the tank while cleaning the bottom of it. I rest my tank on an old tire and its only about 15cm drop and my tank seams (2013 model) are now dented/bend. No leak and paints are not cracked. But the sight just irritate me. Had been hesitating, should I bend back the dent and risk puncturing the tank or crack and chips the paint?? Or just leave it as one of the battle scars....
Posts: 465
Threads: 9
Likes Received: 63 in 24 posts
Likes Given: 43
Joined: Apr 2025
Maybe consider hiding the dent by adding flexible 1/4 inch chrome trim. Available at auto parts stores.
Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
Gently compress it back into "straightness" with a wood clamp?
Posts: 322
Threads: 5
Likes Received: 17 in 10 posts
Likes Given: 25
Joined: Nov 2019
By the sounds of it, paintless dent removal might be worth a shot..
Posts: 7,005
Threads: 93
Likes Received: 480 in 262 posts
Likes Given: 875
Joined: Apr 2025
(10-05-2020, 04:56 PM)E11even_Hunnit_imp Wrote: By the sounds of it, paintless dent removal might be worth a shot..
^+1^....had over 170, all removed.