Login

Ennsync_imp · 10-10-2018, 04:02 AM

Hello forum Hello

I have my CB 1100 in the garage and looks perfect to my eyes.
I have 2 other bikes right now and have learned about them and their needs , this one however is very new to me. so you will see me posting a lot of questions to the forum.
I needed to ride the CB at night , I was riding in the city and streets and freeway were very well illuminated by lights.
I however realized the front head light ,either at high or low beam focuses at something like 10 feet in front of me.
I don't know if it is because of windshield bracket installed that limits the movement of light or it is the factory design. I think I have dart windshield and bracket. Thanks

Thank you
Ride safe/Ride long

MaFiHa_imp · 10-10-2018, 04:06 AM

Hi Ennsync!

Do you have a closeup of the mounting?
I adjusted my headlight some months ago and had no problem to increase height.

Greetings to my beloved SoCal,
Markus

misterprofessionality · 10-10-2018, 04:24 AM

(10-10-2018, 04:02 AM)Ennsync_imp Wrote: Hello forum
I have my CB 1100 in the garage and looks perfect to my eyes.
I have 2 other bikes right now and have learned about them and their needs , this one however is very new to me. so you will see me posting a lot of questions to the forum.
I needed to ride the CB at night , I was riding in the city and streets and freeway were very well illuminated by lights.
I however realized the front head light ,either at high or low beam focuses at something like 10 feet in front of me.
I don't know if it is because of windshield bracket installed that limits the movement of light or it is the factory design. I think I have dart windshield and bracket.
Thank you
Ride safe/Ride long

i actually had the exact same issue early on, and I noticed it after installing my own Dart screen. if you just loosen those two bolts on the side, tilt the lamp up a bit, and retighten them it will be much better. after I adjusted the angle my low beam is catching objects way out in front of me.

I'm still going to swap to an LED lamp at some point though.

Ennsync_imp · 10-10-2018, 05:21 AM

Thank you both for the response, I will try to do so.
Ride safe/Ride long

**Cormanus** · 10-10-2018, 08:09 AM

Check out this thread, too. http://cb1100forum.com/forum/showthread.php?tid=905

Ennsync_imp · 10-11-2018, 03:28 AM

(10-10-2018, 08:09 AM)Cormanus_imp Wrote: Check out this thread, too. http://cb1100forum.com/forum/showthread.php?tid=905

Thank you , will do so and update.
Ride Safe/Ride Long

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Brake reservoir screw head issue	satchit	72	3,690	04-24-2022, 11:55 PM Last Post: Houtman_imp
	Chrome cylinder head cap	Juancho76_imp	21	1,187	04-03-2022, 08:48 AM Last Post: Juancho76_imp
	Cams, Compression, Head Work?	boynton6spd_imp	12	701	08-08-2021, 02:27 AM Last Post: old blue_imp
	CB900 Custom oil stopper on valve head	AOrhun_imp	9	648	01-27-2021, 10:06 PM Last Post: Houtman_imp
	Fork Tube hex head bolt tool fitment ?	bflint	8	535	11-30-2020, 06:24 PM Last Post: jtopiso_imp
	Cylinder Head cover oil leak and valve clearance increase.	zirconxi_imp	6	497	09-01-2020, 12:19 AM Last Post: peterbaron
	JIS Cross Head Screw Drivers	2017EX_imp	15	1,017	04-15-2020, 01:53 AM Last Post: peterbaron
	running light and brake light	Ennsync_imp	3	303	01-02-2019, 11:24 PM Last Post: GoldOxide_imp
	H4 Head light Bulb Question	Ennsync_imp	36	1,895	12-30-2018, 01:48 PM Last Post: GoldOxide_imp
	Speedometer Allen Head screw loose	mhicks17_imp	1	190	09-15-2018, 02:55 PM Last Post: max