Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Question re jack lift point on oil sump
#11
(09-11-2017, 01:25 AM)SpamJ_imp Wrote: I stuck my Honda 2000 generator on my Samurider Rack, still not enough weight to raise the front wheel...

Surprised, several cinder-blocks on a short plank suspended on the very back end of OEM rear carrier lifts the front off the ground for me.
Reply
#12
On a previous bike, I used to hang a 5-gallon bucket of water off the rack. Works like a charm as long as the bucket doesn't have any leaks (don't ask me how I know).
I'd really be surprised if 25 pounds across the back seat is enough.

With the CB, I'm a fan of the scissor jack under the oil pan idea. Works great.
Reply
#13
I AM SUPRISED THAT NOBODY SUGGESTED TO GET YOUR OVERWEIGHT NEIGHBOR TO SIT ON THE BACK .
TO ME IT MAKES SENSE TO GET A PROPER FRONT STAND WITH THE RIGHT PIN FOR YOUR BIKE.
Reply
#14
Get a set of SW Motech crash bars. Have an assistant push down on the back of the bike (I use the rear rack) and set a pair of jack stands under the center horizontal bars on the crash bars. Big Grin (works for me) Tongue

Ben
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Motorcycle Lift dave 8 450 04-29-2023, 02:30 AM
Last Post: pekingduck
  Table lift vs regular lift KC1100_imp 34 1,806 11-16-2020, 04:05 AM
Last Post: bflint
  Craftsman jack issue pdedse 3 272 04-27-2019, 08:44 AM
Last Post: pdedse
  EZ-LIFT for CB1100? White Dog_imp 0 113 06-19-2017, 05:25 AM
Last Post: White Dog_imp
  Question - can you point me to a particular thread? ohiorider_imp 8 440 04-11-2017, 01:06 PM
Last Post: Cormanus
  2017 Triumphs/Bent Brake Lever/Motocycle lift etc...a miss-mash of comments Frulk_imp 12 619 03-14-2017, 05:19 AM
Last Post: Nortoon_imp
  Loading your bike onto a lift quail_imp 15 634 06-02-2016, 06:04 PM
Last Post: Guth_imp
  I suppose it was bound to happen at some point. Guth_imp 20 1,392 06-09-2015, 11:39 AM
Last Post: Guth_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)