+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: First Tire swap (/showthread.php?tid=4527)
First Tire swap - Zee9_imp - 08-12-2021
Hello people. I’m finally getting new tires for my 2014 cb1100. I don’t have the manual and my friend is helping me put on the new tires. Luckily he has a lot of experience and the necessary tools to do this.
We finally managed to get a pair of Z8’s.
Anything I need to keep an eye on?
Does anyone know the necessary torque values?
Thanks in advance.
Sent from my iPhone using Tapatalk
RE: First Tire swap - peterbaron - 08-12-2021
My front Z8/110-80-18 is tar snake sensitive, especially new and after 3000 kms (presently)
Torque specs (ft-lbs):
* front axle bolt - 44
* front axle pinch bolt - 19
>>
* rear axle nut ('13) - 83
* rear axle nut (after '13) - 69
Good luck
First Tire swap - Zee9_imp - 08-12-2021
(08-12-2021, 01:25 AM)peterbaron_imp Wrote: My front Z8/110-80-18 is tar snake sensitive, especially new and after 3000 kms (presently)
Torque specs (ft-lbs):
* front axle bolt - 44
* front axle pinch bolt - 19
>>
* rear axle nut ('13) - 83
* rear axle nut (after '13) - 69
Good luck
Thanks. From all the review I read the z8’s stood out most to me. Let’s see how they feel once swapped
Sent from my iPhone using Tapatalk
First Tire swap - Zee9_imp - 08-15-2021
Any chance anyone know the torque values for the front and rear brake calipers
Sent from my iPhone using Tapatalk
RE: First Tire swap - Lord Popgun - 08-15-2021
Nope, Nobody knows
OK, just happen to have the book out for another thread.
Front brake caliper mounting bolt (4) 23 Ft lbs ALOC bolt replace with new
Rear brake caliper pad pin: 13 ft lbs (10mm)
Rear brake caliper pin bolt: 20 ft lbs (12mm) ALOC bolt replace with new
Rear caliper bolt: 16 ft lbs
Most do not replace ALOC bolts but put a thread locker on there.
First Tire swap - Zee9_imp - 08-15-2021
(08-15-2021, 02:27 AM)Lord Popgun_imp Wrote: Nope, Nobody knows
OK, just happen to have the book out for another thread.
Front brake caliper mounting bolt (4) 23 Ft lbs ALOC bolt replace with new
Rear brake caliper pad pin: 13 ft lbs (10mm)
Rear brake caliper pin bolt: 20 ft lbs (12mm) ALOC bolt replace with new
Rear caliper bolt: 16 ft lbs
Most do not replace ALOC bolts but put a thread locker on there.
Thanks
Sent from my iPhone using Tapatalk