LED TURN INDICATORS - addition & sharing info

[peterbaron]

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

 

[GoldOxide_imp]

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).

 

[peterbaron]

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
1* As to "BIG" Honda project, research is completed....and the easiest one = takes 1/2 hr to assemble/install it.
Now has to stay in a "cool down brain cell" and final decision will be made Feb/March, as winter end brings more energy to do something
2* Good news that 3D printing is widely accessed.
You know, every dollar pumped int motorcycle is considered lost :-/

 

[GoldOxide_imp]

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
1* As to "BIG" Honda project, research is completed....and the easiest one = takes 1/2 hr to assemble/install it.
Now has to stay in a "cool down brain cell" and final decision will be made Feb/March, as winter end brings more energy to do something
2* Good news that 3D printing is widely accessed.
You know, every dollar pumped int motorcycle is considered lost :-/

Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.

I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).

 

[peterbaron]

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
1* As to "BIG" Honda project, research is completed....and the easiest one = takes 1/2 hr to assemble/install it.
Now has to stay in a "cool down brain cell" and final decision will be made Feb/March, as winter end brings more energy to do something
2* Good news that 3D printing is widely accessed.
You know, every dollar pumped int motorcycle is considered lost :-/

Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.

I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).

Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.

I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).

....check and read avatar

 

[GoldOxide_imp]

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).

You can't get lazy. There is the big H O N D A project to do.

Have not started this project yet, just thinking of it during lonely winter days and sharing with others...

Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
Amazon.ca

Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-v...tesy-Lights-/303153546975?_trksid=p5731.m3795

First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.

:idea:
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.

I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
1* As to "BIG" Honda project, research is completed....and the easiest one = takes 1/2 hr to assemble/install it.
Now has to stay in a "cool down brain cell" and final decision will be made Feb/March, as winter end brings more energy to do something
2* Good news that 3D printing is widely accessed.
You know, every dollar pumped int motorcycle is considered lost :-/

Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.

I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).

Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.

I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).

....check and read avatar

Alright, you twisted my arm PB (aka DF). :-/