Adding a Dash Cam - Rexing V1 on CB1100

[EarsOnWheels_imp]

If you've been paying attention to the news, you know how important dash cameras have been to making the world more safe and more just (and more entertaining). I've been using a GoPro to protect myself, but I really wanted a "black box" system that begins recording as soon as I turn on the bike and turns off when the bike turns off. Now that I've got an accessory port (thanks InHouseBob!), I've set one up.

Rexing V1 ($99) - Amazon.com



Accessory port (cigarette plug) with USB adapter.

Adhesive pad and mount on Chic Design Road Comet 1.

Slide/click dash cam in place.



Let's roll. Low profile.

 

[kennyw]

How does the video look? The first time I mounted to my windscreen, the video was horrible due to vibration.

 

[EarsOnWheels_imp]

The results:

I later corrected the date, removed the date, removed the license plate stamp, updated the firmware, turned off the impact sensor (was locking/saving clips due to potholes), and turned on the screen saver (turns black after a minute).

If your headlight bleeds, you *will* see it.



But otherwise, low light performance seems decent.



I've covered up the gap between the light and fairing with some electrical tape. I first checked the rubber edging that came with the RC1, but it is not sufficient. Will probably use some black gaff tape later. Also, because wind moves the fairing, it will shake the footage some. I added a foam pad on either side of the instrument panels. We'll see if it helps. I know others have already done this to prevent contact, though that hasn't been an issue for me.

 

[BackOnTrack_imp]

That's a decent one. I ordered an innovv K1 yesterday (INNOVV Motorcycle Safety Systems: Dash Cams, CarPlay & BSD) online, direct from manufacturer, after my brother's bike was rear ended exactly 12 afters after purchase!

Sent from my SM-N9005 using Tapatalk

 

[Inhouse Bob]

Love to see a bit of the video when you get that worked up. Mostly 'cause I'll be in it :banana::banana:

 

[memphismike_imp]

Love to see a bit of the video when you get that worked up. Mostly 'cause I'll be in it :banana::banana:

I use a Sena 10C on my Helmet. Have thought of keeping it on more and more just for my own protection vs just using it for MotoVlogging. In the event something were to happen, would like to have the footage for my records in the event i should need it!

 

[Rocky_imp]

On another forum I belong to a lady rider was intentiionally being harrassed by a cage driver until she was in a position to point to the camera on her helmet and the one on her handlebars.
Once the idiot saw that he was being recorded he disappeared in a hurry.

 

[JF Coastal_imp]

Well, this sure would have been nice to have last tuesday in my accident. I guess the video just loops unless something happens, then you disconnect and get it off of the device ??

 

[Magnus_imp]

It's great to have a dash cam. I've used the following on some of my bikes (not on by CB yet) as it mostly all can be hidden beneath the seats etc with only a small camera visible to deter thieves. Been working great for a year or more which seems good for a Chinese product. You can find it on Amazon here:

Amazon.com

 

[EarsOnWheels_imp]

Well, this sure would have been nice to have last tuesday in my accident. I guess the video just loops unless something happens, then you disconnect and get it off of the device ??

With the g-sensor (accelerometer?) off, yes, that is how it works. You can also press a button anytime to "lock" the currently recording clip, so it won't be overwritten.

With the g-sensor on, it will lock a clip if you are hit. But even on the lowest sensitivity, it was saving about half the clips due to potholes. Might be more effective in a car.

Will post a clip when available!

 

[Riko_imp]

Looks very cool and sharp!

I'm planning to do about the same thing, but with Sony Action cam hardware.

 

[treytexag_imp]

Riko, what model Sony is that, and what hardware are you using to mount it up? Also, it seems to have some kind of lens protector device on it, it looks to be rectangular in shape . . . what is that?

I ask because I own a Sony HDR-AS100V Action Cam (white in color). I recently scratched the lens pretty good, and it's distorting the video. I ordered an non-OEM replacement lens from Peau Productions, but I've not had a chance to try to install it in the Sony . . . . of course the Sony Action cam lens was not built for "home users" to replace the lens.

Anyway, I'd like to hear more about your setup please sir.

Thanks.

 

[Riko_imp]

its an AS50, the protector you say is actually the housing that comes with it.

Together with the remote, it all comes in one kit.

All Sony Action Cams are sold with some kind of protective housing.
Normally your AS100V came with such a housing as well...? :huh:

As for mouting hardware, I had to buy seperate stuff and mixed it all up in one big mash
But the mouting at the rear is primaraly from this kit: VCT-HM2 Handlebar Mount
http://www.sony.com/electronics/actioncam-mounting-accessories/vct-hm2

But as you can see its long, because I added various parts to it from other kit.
For instance I also bought 2 of these arm kits: http://www.sony.com/electronics/actioncam-mounting-accessories/vct-amk1

Up front I have an Roll Bar mount, currently I slimed the parts down because its toooo shaky up there:
http://www.sony.com/electronics/actioncam-mounting-accessories/vct-rbm2



[url=https://postimg.org/image/oswogun45/]

[url=https://postimg.org/image/oub7o0ebp/]

[url=https://postimg.org/image/5dqi1hj7p/]