Can we talk Highway Pegs?

[GaryMNM_imp]

Anything you like or dislike about any forward highway pegs you've installed and where you mounted them?

What mounts did you use.

Any pic's you can post?

I can't help but feel I need that forward option to rotate a foot or both feet on occasion just for a slight position change.

I have also been pulling up some old and new posts on potential seat upgrades since sadly for me my 14 Standard seat isn't working for extended saddle time.

I appreciate your feedback on any forward peg info.

Thanks.

[Hittheroad_imp]

I just Installed some Highway Pegs on my Honda Engine Guards last night. I went on a 40 mile ride with them and I found that they work excellent!

[url=http://s1235.photobucket.com/user/a320skidooboy/media/2014%20CB1100%20DLX/IMG_0865_zpscbsskbja.jpg.html]

[4 Paws_imp]

which pegs and where did you get them?

[Hittheroad_imp]

I got them from a local shop nearby called Mudspringer's. Great personal service. Because of the very limited space on these guards to install pegs, they new exactly what I would need to make it work. You could get this hardware anywhere you wanted. Here's the part numbers for you.

All Kuryakyn hardware.
#1002. 1" Magnum Quick Clamp
#4511. Short Right Angle Mounts. (3.5")
#8000. ISO-Peg small/male

[GaryMNM_imp]

Those look great! Have you been able to check your ground clearance on turns yet?

I got them from a local shop nearby called Mudspringer's. Great personal service. Because of the very limited space on these guards to install pegs, they new exactly what I would need to make it work. You could get this hardware anywhere you wanted. Here's the part numbers for you.

All Kuryakyn hardware.
#1002. 1" Magnum Quick Clamp
#4511. Short Right Angle Mounts. (3.5")
#8000. ISO-Peg small/male

[Hittheroad_imp]

Those look great! Have you been able to check your ground clearance on turns yet?

I got them from a local shop nearby called Mudspringer's. Great personal service. Because of the very limited space on these guards to install pegs, they new exactly what I would need to make it work. You could get this hardware anywhere you wanted. Here's the part numbers for you.

All Kuryakyn hardware.
#1002. 1" Magnum Quick Clamp
#4511. Short Right Angle Mounts. (3.5")
#8000. ISO-Peg small/male

They are 4 inches higher than the main pegs.

[Pterodactyl_imp]

New member CBReno has a good set of highway pegs on his bike. See:

http://cb1100forum.com/forum/showthread....#pid104304

Cheers

[bflint]

I got them from a local shop nearby called Mudspringer's. Great personal service. Because of the very limited space on these guards to install pegs, they new exactly what I would need to make it work. You could get this hardware anywhere you wanted. Here's the part numbers for you.

All Kuryakyn hardware.
#1002. 1" Magnum Quick Clamp
#4511. Short Right Angle Mounts. (3.5")
#8000. ISO-Peg small/male

**
THANKS. Bought these on Amazon per your specs.