2014 Ignition Key

[tomcat_imp]

Anyone know an ignition key blank number(not the big plastic head OEM key)?

[mvk24_imp]

I might have one on my blank key for my 2014 if it is still in the bag standby.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Here ya go. I never got it cut because my neighbor i got the bike from found his spare

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

[tomcat_imp]

Thanks mvk24, but I'm looking for a blank without the large plastic head and hope there is one out there.

[mvk24_imp]

O gotcha gotcha. I didnt know what you meant by plastic head since that is just the factory key.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

[tomcat_imp]

Prefer the bare metal key instead of the plastic head key. Found a locksmith on ebay that cuts to code. Fingers crossed...

[mvk24_imp]

Prefer the bare metal key instead of the plastic head key. Found a locksmith on ebay that cuts to code. Fingers crossed...

Thats awesome, please share his link if it works i would like to have another spare around.

I needed some special locksmith to cut the blank factory key so I never did it


2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

[pekingduck]

The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

[mvk24_imp]

The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

[suhawk305]

Agree with Pekingduck. The ferret and I found that this metal key blank works on our CB 1100s:
Ilco X265. HD109

Both of us found our local locksmiths sells and cuts these blanks.

[Gone in 60]

My spare was cut from a JMA key. The designation on the back says "HOND 33"

Just don't make my mistake when you get yours cut... don't stand there in front of the locksmith turning the key, expecting it to start the engine, and then complain to the locksmith that the key doesn't work. He'll roll his eyes and say "You know you have to push that button on the handlebar to start it, right?"