Posts: 111
Threads: 29
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2021
My CB came from the previous owner with what looks like strategically placed protective adhesive patches on the tank. It looks like it's done its job. I just wonder if can be safely removed and replaced as it wear out. I don't want the protective stuff to damage the finish.
Posts: 8,035
Threads: 21
Likes Received: 186 in 108 posts
Likes Given: 134
Joined: Apr 2025
Most likely the film is this or from another supplier:
https://thetankslapper.biz/
It should come off easily. You could use a spray bottle of water/alcohol mix to help ease it off and a little heat if necessary from a hair dryer. Mine comes right off and is reusable.
Read some on the tankslapper site and see what you think.
Posts: 111
Threads: 29
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2021
(07-22-2021, 07:41 PM)Lord Popgun_imp Wrote: Most likely the film is this or from another supplier: https://thetankslapper.biz/
It should come off easily. You could use a spray bottle of water/alcohol mix to help ease it off and a little heat if necessary from a hair dryer. Mine comes right off and is reusable.
Read some on the tankslapper site and see what you think.
If it's not tankslapper, it is something similar. I'll reach out to them. thanks.