My CB came from the previous owner with what looks like strategically placed protective adhesive patches on the tank. It looks like it's done its job. I just wonder if can be safely removed and replaced as it wear out. I don't want the protective stuff to damage the finish.
![[Image: 43955931f925a0d15dc8bb85d12a03ed.]](https://cb1100forum.net/forum/uploads/imp/202107/43955931f925a0d15dc8bb85d12a03ed.)
Most likely the film is this or from another supplier:
https://thetankslapper.biz/
It should come off easily. You could use a spray bottle of water/alcohol mix to help ease it off and a little heat if necessary from a hair dryer. Mine comes right off and is reusable.
Read some on the tankslapper site and see what you think.
(07-22-2021, 07:41 PM)Lord Popgun_imp Wrote: [ -> ]Most likely the film is this or from another supplier: https://thetankslapper.biz/
It should come off easily. You could use a spray bottle of water/alcohol mix to help ease it off and a little heat if necessary from a hair dryer. Mine comes right off and is reusable.
Read some on the tankslapper site and see what you think.
If it's not tankslapper, it is something similar. I'll reach out to them. thanks.