Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Removing seat
#1
New 2017 ex-owner - i am stumped on how to remove the seat. The manual says turn seat lock key and pull back and up to remove the seat. No luck, the seat wont budge. Unlike older models (2013-2014) there is no latch behind the helmet lock to pull down.

Any ideas?
Reply
#2
There is a release behind the helmet lock that you have to pull down to release the seat.
Reply
#3
http://www.cb1100forum.com/forum/showthr...p?tid=4886
Reply
#4
(06-12-2017, 11:06 AM)pittycheria_imp Wrote: New 2017 ex-owner - i am stumped on how to remove the seat. The manual says turn seat lock key and pull back and up to remove the seat. No luck, the seat wont budge. Unlike older models (2013-2014) there is no latch behind the helmet lock to pull down.

Any ideas?


Am I the only one that read that the first time?

Tongue
Reply
#5
duh reading comprehension. Yea I missed that. Have no idea then, but if you find out, please let us ( the rest of the forum) know.
Reply
#6
(06-12-2017, 12:36 PM)PowerDubs_imp Wrote:
(06-12-2017, 11:06 AM)pittycheria_imp Wrote: New 2017 ex-owner - i am stumped on how to remove the seat. The manual says turn seat lock key and pull back and up to remove the seat. No luck, the seat wont budge. Unlike older models (2013-2014) there is no latch behind the helmet lock to pull down.

Any ideas?


Am I the only one that read that the first time?

Tongue


Am I the only one that read that the first time?

Tongue
I feel that it MUST have been an edit as to why we all missed that. Tongue
I looks like you just have to turn the key and pull up and rearward on the seat at the same time from what I can see in this picture.

http://www.hondapartshouse.com/oemparts/...ac330/seat
Reply
#7
Might be silly of me, but did you leave the key in the seat lock? It's something like the gas cap lock. You have to leave the key in it until you are done.

Wait till you have to put the seat back on. I had lots of practice with my CB500XA, so this seat is not too hard for me to lock down.

The toughest thing for me is the putting this porker on the center stand. I weigh 220 pounds and have 26 years of experience putting a dozen different motorcycles on their main stand without a problem. But for some odd reason this one tends to lean towards the rider. Which of course is much better than having it pitch away from you. But both feet of the stand must be firmly planted to hoist this oinker to her position of rest.
Reply
#8
(06-12-2017, 12:36 PM)PowerDubs_imp Wrote:
(06-12-2017, 11:06 AM)pittycheria_imp Wrote: New 2017 ex-owner - i am stumped on how to remove the seat. The manual says turn seat lock key and pull back and up to remove the seat. No luck, the seat wont budge. Unlike older models (2013-2014) there is no latch behind the helmet lock to pull down.

Any ideas?


Am I the only one that read that the first time?

Tongue
Am I the only one that read that the first time?

Tongue No.
Reply
#9
So is that it Nortoon? You just turn the key and pull up on the seat? Do you have to hold the key in the turned position or just turn it and let go?
Reply
#10
Looks like you turn the key and hold, then pull up the seat.

Check out this video at about 09:54 :

https://www.youtube.com/watch?v=M4MvqWHr...e=youtu.be
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  A question,or theory about removing engine covers. FLYTYM_imp 4 434 11-10-2020, 02:48 PM
Last Post: Bazbro_imp
  Advice on removing Honda and CB1100 badges ManInBlack_imp 7 563 08-16-2017, 10:48 AM
Last Post: ManInBlack_imp
  2013 STD seat vs. 2014 DLX seat VTR1000F_imp 24 1,799 07-06-2016, 10:51 AM
Last Post: Offroad
  removing tank stickers justinrhenry_imp 22 1,185 04-04-2016, 11:23 AM
Last Post: Lord Popgun

Forum Jump:


Users browsing this thread: 1 Guest(s)