Posts: 3,881
Threads: 115
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
I think that most of us have used the PB Blaster in the spray cans but yesterday I used the PB Blaster Grease on 4 very rusty bolts on a 16 year old hitch on a 2004 CRV.
This morning the nuts came of very easy and sometimes if you use the spray cans it runs a lot. The grease is easy to put on with the brush on the top of the can . I am glad that I found this stuff at Northern Tools.
Posts: 4,383
Threads: 240
Likes Received: 827 in 337 posts
Likes Given: 644
Joined: Apr 2025
So, you brush it on a rusty bolt and it leeches into it? Sounds intriguing... and less messy than the spray.
Posts: 405
Threads: 16
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2025
That’s a good tip. Always looking for something easier , quicker, cleaner.
Posts: 2,635
Threads: 125
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jun 2016
Posts: 5,024
Threads: 136
Likes Received: 135 in 57 posts
Likes Given: 65
Joined: May 2013
Anything that can help me get my nuts off quicker is worth the price in my book. Thanks for the information!
Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
(12-03-2020, 01:07 AM)EmptySea_imp Wrote: Anything that can help me get my nuts off quicker is worth the price in my book. Thanks for the information!
I thought that was the purpose of the CB1100?
Posts: 16,119
Threads: 342
Likes Received: 666 in 365 posts
Likes Given: 775
Joined: Apr 2025
Posts: 405
Threads: 16
Likes Received: 4 in 3 posts
Likes Given: 19
Joined: Apr 2025
Not familiar with this product here.
Does any one use Mouse Milk Penetrating Oil ?
Regards NRTM
Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
(12-03-2020, 08:54 AM)noroomtomove_imp Wrote: Not familiar with this product here.
Does any one use Mouse Milk Penetrating Oil ?
Regards NRTM
No, but will now keep an eye out.
