Posts: 13
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2023
Dealer here in NTX charged $170 to swap out front & rear. Always done my own in the past, but this is the first bike I’ve had long enough, and with pretty enough rims, to worry about scratching.
Looks like next time, I’m going to invest in the equipment to do them myself. Even if it’s not inexpensive, changing 3 pair is pushing $600 after taxes & fees.
When did it become so expensive to lever off tires? I’m afraid to ask how much they’d charge to spin off a filter and pour oil in it.
TX
Posts: 23,403
Threads: 697
Likes Received: 482 in 220 posts
Likes Given: 597
Joined: Apr 2025
yea that's pretty pricy. Last time I checked my dealer got $120 for F & R on the bike and $30 a wheel off the bike.
Posts: 4,383
Threads: 240
Likes Received: 827 in 337 posts
Likes Given: 644
Joined: Apr 2025
I used to have a really good guy who charged $20 a wheel off the bike, and never scratched my rims. Unfortunately he went out of business, and the next best deal I could find was $100 per pair off the bike. I've bought the tools to do it myself from now on, and did my Bonneville tires without too much drama a while back.
Everything's more expensive now, so I guess motorcycle tire shops figure they can charge more too.
Posts: 16,119
Threads: 342
Likes Received: 666 in 365 posts
Likes Given: 775
Joined: Apr 2025
Plus all their costs have gone up, so maybe they need to.
Posts: 6,964
Threads: 93
Likes Received: 417 in 234 posts
Likes Given: 827
Joined: Apr 2025
^^+1^^, or deliver my bike for new tires installation.
Posts: 2,998
Threads: 118
Likes Received: 656 in 281 posts
Likes Given: 669
Joined: Apr 2025
I have my limits...I did everything on my KLR650 and never had it once into the shop. Learned a lot. But some of those tire-changes---ugh, but still fun to learn and it did get better with improved techniques. I'll do the same if I can on my '23 DR650.
But I decided that the CB1100 was going to be different. Oil / filter, sure. Brake fluid, likely. Maybe even change out the chain and sprockets...but then again, that may only need doing twice in my life with this bike. Do I need to learn to do that? Undecided. But valves and tires...no thank you. Call me when it's ready!
Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
I pay $24 Canadian beaver backs for my Honda garage to swap rubber and balance without scratching the rim.
Considering world changes in the past few years, I thought that was fair market value. Higher than before, yes.
Posts: 6,964
Threads: 93
Likes Received: 417 in 234 posts
Likes Given: 827
Joined: Apr 2025
Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
(04-03-2023, 11:30 AM)peterbaron_imp Wrote: CAN24 is good price
Last year it was $20 Cdn.
I suspect it will continue to rise.
Posts: 13
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2023
One of the hazards of being frugal I guess (wife says I’m cheap).
I think over $100 puts me in the not spending money in the cost/benefit part of the equation. Would probably be different if I didn’t find working on my bikes a bit relaxing. It will be a good excuse to buy new tools as well.
I do pay to get my lawn mowed because it’s not worth the allergy issues. I kinda miss pulling out the manual reel mower though.
