Posts: 46
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2016
Has anyone changed out their foot pegs?
I realize that the factory pegs are "proper" for the CB but they have always seemed so undersized, at least for my liking. I'm not clear on why two of the five points of contact with the bike (save knees) are so tiny. It's perplexing... If this was a high performance racing machine I could understand. It's not though, it's a standard, refined and classic motorcycle. Best I can figure is that the foot pegs fall under the category of "that's how it's always been"
Don't get me wrong... I'm not looking for Luxury liner softail deluxe platforms BUT I'd like something with a bit more surface area under my boots.
Any suggestions?
Posts: 8,026
Threads: 21
Likes Received: 180 in 103 posts
Likes Given: 122
Joined: Apr 2025
I'm glad I have girl size feet
My pegs are just right!
Sorry I can't help Matt, but there have been some peg changes by a few. If they don't chime in I'll see if I can find some threads later.
Posts: 197
Threads: 23
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Apr 2013
Stayed tuned in. I have a set of inexpensive aftermarket replacement pegs for a Goldwing on the way from China.
They're like the regular Honda pegs, just a bit wider/flatter. Spotted their use on a CB500 forum thread which got the original idea from a CB300 forum thread, so if it fits those smaller Honda's it should fit our CB1100 just fine.
Will post a new topic once I get them in my hands.
Aloha,
Huladog
Posts: 5,024
Threads: 136
Likes Received: 135 in 57 posts
Likes Given: 65
Joined: May 2013
Huladog's made me remember that the pegs on my wife's CTX700 are flatter and maybe a little longer.
Posts: 106
Threads: 9
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2015
Weird, I have never thought the footpegs were too small. If anything they have too much rubber on them.
Posts: 3,454
Threads: 129
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2015
We may be blurring the distinction between foot pegs and foot rests (and potentially floor boards, though I don't think that's the OP's intention). I suppose it comes down to personal preference and one's stance on the bike. It's all good. We see the same thing with brake lever- and shift lever enlargers.
Posts: 300
Threads: 32
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2013
I changed mine. and they are adjustable...purchased them from Japan
http://cb1100forum.com/forum/showthread.php?tid=5578
Posts: 46
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2016
Good info... Looking forward to more ideas if anyone has any
Posts: 23,403
Threads: 697
Likes Received: 482 in 220 posts
Likes Given: 597
Joined: Apr 2025
(05-06-2016, 03:20 AM)EmptySea_imp Wrote: Huladog's made me remember that the pegs on my wife's CTX700 are flatter and maybe a little longer.
Take a ruler to them Sea and see what they measure.
Posts: 197
Threads: 23
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Apr 2013
A little misleading camera angle so the Goldwing pegs look much bigger than they really are.
Starting a new topic covering the installation and challenges over in Accessories/Modifications!
Aloha,
Huladog
